Chaostec cnc engraving machine

Home | Operation | Service | connect us

WT CUTTING SOFTWARE USD27

WT ENGRAVER SOFTWARE USD190

WT ENGRAVER V8 SOFTWARE USD190

Type3 ENGRAVER SOFTWARE USD300

PLOTTER KNIFE(10) USD35 ( 30°.45°.60°)

CUTTING PLOTTER	300-USB	300-LASER	600-USB	1350-USB	1350-U&B	1600-U&B
max width	36 cm	A3	73 cm	135 cm	135 cm	160 cm
working area	27 x ∞ cm	290 x 2000 mm	64 x ∞ cm	125 x ∞ cm	125 x ∞ cm	150 x ∞ cm
cutting soft	●	●	●	●	●	●
holder	X	X	●	●	●	●
laser orientation	X	●	X	X	CAN BUY	CAN BUY
two car rail	X	X	X	X	●	●
one car rail	●	●	●	●	X	X
knife holder	●	●	●	●	●	●
paper basket	X	X	X	X	●	●
pen holder	●	●	●	●	●	●
knife	●	●	●	●	●	●
line (USB.RS232.LPT)	●	USB	●	●	●	●
electric line	●	●	●	●	●	●
warranty	●	●	●	●	●	●
PRICE(USD)	300	450	350	400	600	800

LASER ENGRAVER	*CO2-3020*	*CO2-7050*	*CO2-9060*	*CO2-1290*	*CO2-1318*	*CO2-1325*
WORKING AREA	150 mm x 190 mm	500mm x 700 mm	900 mm x 600 mm	1200 mm x 900 mm	1300 x 1800 mm	1300 x 2500 mm
LASER POWER	40W	60W	60W	80W	100W	130W
PRICE(USD)	3600	6600	8600	9600	15600	18900
SYNRAD YOU ALSO CAN USE SYNRAD 30W.50W.75W.100W.150W.200W IN OUR LASER MACHINE

CNC ENGRAVER	*CONTROL SYSTEM*	*300 C*	*900 C*	*1300 C*	*2500 C*
table area		250 × 350mm	800 × 1270mm	1400 × 1800mm	1500 × 2800mm
working area		260 × 310 × 80mm	700 × 800 × 110mm	1300 × 1300 × 150mm	1300 × 2500 × 150mm
spindle motor		800W cooled by water	1500W cooled by water	2200W cooled by water	3000W cooled by water
PRICE(USD)	2000	3200	9600	11200	12200

PLASTIC PRESS	2600	PRINTER	*P-1808*	*P-2512*	*P-3212*
working depth	3 mm ~ 180 mm	paper width	185 cm	255 cm	325 cm
working area	1500 x 2600mm	max width	182 cm	252 cm	320 cm
pressure	3 T ~ 5 T	DPI	185 ~1200dpi
PRICE(USD)	12200	PRICE(USD)	9600	10900	12200

No.141, Fongsong Rd., Fongshan City, Kaohsiung County 830, Taiwan (R.O.C.)

TEL : +886-7-7353018 FAX : +886-7-7351586

Copyright 2007 CHAOSTEC CO.,LTD. All rights reserved